We have an Intel MIC machine from Intel available as animal.eecs.utk.edu.  Please email iclhelp for an account because it is under NDA.

We have a remotely accessible machine named snapple.eecs.utk.edu running Lion (10.7) available now.  Email iclhelp for an account.

genesis.eecs.utk.edu:

1. AMD Phenom(tm) II X6 1100T Processor (1 Socket, 6 Core)
   
2. 8G RAM
3. 2x AMD Radeon HD5870s (Eyefinity Edition)(Cypress XT)
   

romulus.eecs.utk.edu:

1. AMD Opteron(tm) Processor 6180 SE (4 Socket, 12 Core)
   
2. 256G RAM
3. 2x NVIDIA C2050 (Fermis)
   

remus.eecs.utk.edu:

1. AMD Opteron(tm) Processor 6180 SE (4 Socket, 12 Core)
   
2. 256G RAM
3. 2x NVIDIA C2050 (Fermis)

It is up as pluto.eecs.utk.edu and contains 4 processors with 12 cores each and 128G RAM.

Available as zeus.eecs.utk.edu.  Is not on LDAP so please email iclhelp for an account.

Intel Nehalem-EX machine available now as saturn.eecs.utk.edu

The cluster consists of over 100 x86_64 compute nodes with a total of over 600 processor cores. All nodes are connected via 1Gbit Ethernet and Infiniband. The operating system is Scientific Linux 5.2 (Redhat Enterprise compatible). Primary storage is in the form of a 10TB EMC CX300 NAS and a 24TB Sunfire X4500. The batch-queue system is Sun Grid Engine.

 

Information for getting an account can be found at:

http://hpc.usg.utk.edu/bin/view/Main/AccountApplication

 

The user documentation can be found here:

https://hpc.usg.utk.edu/bin/view/Main/UserDocumentation

Power 6 available now.  bluegrass.cs.utk.edu

Cell Blades available now.  poseidon.cs.utk.edu and neptune.cs.utk.edu

zoot.cs.utk.edu and dinah.cs.utk.edu are available now.  For more information about these systems you can look under the General Hardware -> x86_64 menu.

8 intel Core 2 Duo 2.13 GHz with 2 GB of RAM nodes (battlecat1-battlecat8) plus a dual dual-core Xeon 1.6 GH with 2 GB of ram (battlecat0). Just like the TORCs this cluster is open, you can ssh in to any node with your username and password.

It is a 2x4 (dual processor, quad core) machine with 16G of RAM and it is running Fedora Core 6. Please email iclhelp for an account because there is no home area access or ldap user authentication. Its address is brutus.cs.utk.edu.

Both fortran and C compilers are now on torc0-8, torc10, woodstock, oak, and hp01-06. Look at the hardware pages for more information on their install paths.

Cell machine is accessible at ares.cs.utk.edu and the Intel machine is accessible at woodstock.cs.utk.edu.

Refer to the information in the Cluster Information links for more information.

We have a new general login solaris 9 machine, beaker.cs.utk.edu. It is a Sun Blade 100 with a 502 Mhz UltraSPARC-IIe Processor and 512 MB of RAM.

hp01-hp02 are now up again. They are not able to run Red Hat AS4, so they are running AS3. Your code might not be compatible between hp03-hp06 and hp01-hp02.

The webserver is in the process of being moved from icl.cs.utk.edu to fozzy.cs.utk.edu. You will no longer be able to ssh into icl and get the quad solaris machine. For use of the old icl.cs.utk.edu you will need to log in to ig.cs.utk.edu.

All of our non-server linux machines will be switched over to Debian over the summer. We will be starting this process in early July and expect to be done by the beginning of the fall semester. If you want to make sure your software is compatible you can use davinci.cs.utk.edu to test your code.

The msc cluster has been recomissioned as the torc cluster, and the original torc machines have be removed.