LAPACK Archives

[Lapack] Lapack Sun

Tatiane,

It looks like the compiler only had trouble finding the right interface when 
it started compiling the "AUXFILES" in the Makefile.  You should check your 
log to see if it correctly compiled the files listed under "INTERFACES", 
such as la_auxiliary.f.  These files are created at compile time using m4, 
and they may not have been created correctly if, for example, the m4 
preprocessor was not found.

   --Ed Anderson

----- Original Message ----- 
From: "Tatiane Bressan" <lapolli@Domain.Removed>
To: <lapack@Domain.Removed>
Sent: Wednesday, April 05, 2006 1:45 PM
Subject: [Lapack] Lapack Sun


Dear all,

I am trying to compile LAPACK3e in a SunOS sun4u sparc
SUNW,Sun-Fire-V440 machine and
I am getting some errors messages, see below. Does anybody have
suggestions on how to
overcome this problem?
...
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaebz.o la_slaebz.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaeif.o la_slaeif.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaexc.o la_slaexc.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlagv2.o la_slagv2.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaqsb.o la_slaqsb.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaqsp.o la_slaqsp.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaqsy.o la_slaqsy.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaqtr.o la_slaqtr.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlaruv.o la_slaruv.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlasdx.o la_slasdx.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlasqx.o la_slasqx.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dlasy2.o la_slasy2.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dormr3.o la_sormr3.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dsygs2.o la_ssygs2.F
/opt/SUNWspro/bin/f90 -O3 -u -c -o la_dsytd2.o la_ssytd2.F
/opt/SUNWspro/bin/f90 -O3 -u -c -DLA_REALSIZE=4 clabrd.F

USE LA_AUXILIARY, ONLY: LA_LACGV, LA_LARFG
^
"clabrd.F", Line = 5, Column = 11: ERROR: "LA_AUXILIARY" is specified as
the module name on a USE statement, but the compiler cannot find it.

USE LA_BLAS1, ONLY: LA_SCAL
^
"clabrd.F", Line = 6, Column = 11: ERROR: "LA_BLAS1" is specified as the
module name on a USE statement, but the compiler cannot find it.

USE LA_BLAS2, ONLY: LA_GEMV
^
"clabrd.F", Line = 7, Column = 11: ERROR: "LA_BLAS2" is specified as the
module name on a USE statement, but the compiler cannot find it.

f90comp: 2020 SOURCE LINES
f90comp: 3 ERRORS, 0 WARNINGS, 0 OTHER MESSAGES, 0 ANSI
*** Error code 1
make: Fatal error: Command failed for target `clabrd.o'
Current working directory /usr/local/LAPACK3E/SRC
*** Error code 1
make: Fatal error: Command failed for target `lapacklib'
Current working directory /usr/local/LAPACK3E
*** Error code 1
make: Fatal error: Command failed for target `sun'

Thanks a lot!!!

-- 
Tatiane Lapolli Bressan
Suporte de Computadores
Centro de Previs?o e Estudos Clim?ticos ? CPTEC
Rod. Presidente Dutra, km 40 - Cachoeira Paulista/SP
Fone: 3186-8570 ? Email: lapolli@Domain.Removed

_______________________________________________
Lapack mailing list
Lapack@Domain.Removed
http://lists.cs.utk.edu/listinfo/lapack 


<Prev in Thread] Current Thread [Next in Thread>


For additional information you may use the LAPACK/ScaLAPACK Forum.
Or one of the mailing lists, or